ECOPROTEC’s Porcelain Paving Enhancer has been shortlisted as an industry finalist in the Tomorrow’s Contract Floors Awards 2026. Recognising and rewarding exceptional products and services in the flooring sector, finalists include a combination of reader nominations and editor’s picks. Voting for the top three winners opens today and closes on 9 March. Votes can be registered in The Tomorrow’s Contract Floors Awards Guide, with a direct link to the poll here.
ECOPROTEC’s new PFAS-free Porcelain Paving Enhancer is a water-based, self-shine enhancer formulated for porcelain tiles and pavers. As well as giving tiles a ‘just washed look’, the enhancer provides practical benefits, being highly resistant to foot traffic, general wear and stains, and also promoting easier maintenance. The eco-friendly treatment also provides UV-resistance and, whilst glossy in nature, causes minimal change to a tile’s slip resistance properties.
On clean, dry, residue-free surfaces, ECOPROTEC Porcelain Paving Enhancer is applied with a foam roller, sealant applicator pad or paint brush until an even, thin film is created. The treatment should be left to dry for one hour. For a more enhanced appearance, further coats can be applied at rights angles – and with an hour’s drying time between each application – to a maximum of four coats. The treatment can also be used on existing tiles and pavers which should first be cleaned with ECOPROTEC Intensive Cleaner and then rinsed and left to dry. Being water-based, the enhancer can be applied over residual moisture and is safe to use in unventilated spaces. It’s also breathable, so will not trap moisture within the tile or substrate. To maintain the glossy aesthetic, tiles and pavers can be renovated by stripping the original coating using ECOPROTEC Joint Residue Remover and reapplying every 2-3 years. Surfaces should be routinely swept and regularly mopped using ECOPROTEC General Cleaner.
ECOPROTEC Porcelain Paving Enhancer is available in one litre and five litre units and has an approximate coverage of 30-40 m2 per litre, per coat, depending on the tile texture. To find out more, please visit https://www.ecoprotec.co.uk or contact the ECOPROTEC Technical Team on 01823 662722 or email technical@ecoprotec.co.uk
